#Hevc ivi pro encode Bluetooth#
#Hevc ivi pro encode tv#

The board is assembled neatly, the parts are securely soldered. Protective ESD assemblies are installed on the HDMI lines. Mains transformer present. The processor and RAM have a heatsink of a normal size for such devices, which gives hope for adequate cooling. WiFi/Bluetooth antennas are made as separate boards and are connected to the main board with a coaxial cable. An eMMC5.1 drive from Samsung is used as internal storage, the WiFi / BT module is unnamed. A multiplexer is installed next to the HDMI connectors to control HDMI input and output.

To disassemble the KA2, I had to tinker a bit and find hidden screws. The first was under a rubber sticker, which is around the tripod mount, the second under a sticker with a barcode.įirst of all, we disconnect the front panel with a mediator, unscrew all the screws and open the latches around the perimeter of the case. The board inside the case is fixed with two more self-tapping screws. We unscrew them, disconnect the camera and speaker connectors, remove the board. On the right side there is a USB 3.0 connector.

#Hevc ivi pro encode tv#

The top cover has holes for a built-in speaker and a microphone mute switch. On the bottom of the case there is a rubber pad and a thread for mounting the device on a tripod. There are also stationary and folding rubberized legs, with which the KA2 is installed on a TV or monitor.Īll connectors are also located at the bottom, these are two HDMI connectors (input and output), a power connector and RJ45. The camera unit is located on the right side of the front panel. It consists of a camera, an indicator of its inclusion in the form of an illuminated strip, and a plastic curved “shutter” that can physically close the camera. The shutter not only physically closes/opens the camera by rotating the knurled switch knob, but also disables/enables it. To the right is an LED indicator of four RGB LEDs, which signals various operating modes and additionally serves as an indicator of the volume level. Microphone holes are located above the indicator. On the front panel there are buttons for turning on the device and turning on / answering an incoming Google Duo call. Between the buttons is an IR transceiver. The body of the KA2 is made of matte plastic. Assembled qualitatively, without any extra gaps.

IR/Bluetooth remote control with microphone.

Mecool KA2 comes in a cardboard box, which shows a media player, promotional materials from Mecool and brief instructions for connecting.

#Hevc ivi pro encode Bluetooth#

bluetooth remote control with built-in microphone.

curtain covering the camera, a physical microphone mute button.

built-in 2 MP camera. Matrix size -1 / 2.7, Viewing angle 100 °, resolution 1920×1080.

* Amlogic video engine (AVE) with dedicated hardware decoders and encoders* Multi-mode decoder support – 4K x 2K 60fps + 1x1080P 60fps* Supports multiple “secured” video decoding sessions, simultaneous decoding and encoding* Video/image decoders: Multifunctional LED indicator, camera power indicator Speed of network interfaces. Bluetooth operationĪmlogic S905X4 Quad Core Cortex A55 up to 2.0GHz.